论游戏的核心艺术评价标准

数字游戏常被认为是继文学、绘画、音乐等传统艺术之后的“第九艺术”。然而,长期以来,由于游戏的评价标准被商业体系左右,造成了游戏创作在思想层面的偏颇,所以设计师有必要建立一套针对数字游戏的艺术评价标准,以促进游戏的艺术创作和理论研究。从艺术思潮、艺术哲学和设计创新的角度出发,通过美学历史文献查阅、游戏艺术作品案例分析、艺术理论辨析等方法,就游戏的核心艺术因素展开论述。游戏的艺术标准应包括情感表现、艺术反思和创新性三个主要方面。其中,艺术情感是所有艺术的共性和核心;艺术反思是艺术理念的升华和艺术创作的动机;创新性则是艺术更替发展的内在动力。该标准独立于商业体系,将有助于促进和引导数字游戏在艺术层面的发展。     

一种下肢运动意图识别算法性能实时测评系统* .txt

摘要：对腿部运动意图识别算法的实时性能进行综合可靠的评价是实现下肢假肢灵活稳定控制的前提。提出一种逐层分级的基于下肢运动意图识别算法的实时测评方法，对算法的可靠性、稳定性以及运动意图识别速度进行综合评价。利用开发的运动意图识别算法评测系统，对基于肌电信号源和机械信号源的两种运动意图识别算法进行了实时性能测试，发现肌电信号源的算法识别时间大于机械信号源算法，但是其算法稳定性优于机械信号源算法。进一步地，还利用该评测系统有效地区分出正常识别策略与异常识别策略，发现正常策略的动作识别稳定系数比异常策略高25%左右。因此，所提的基于下肢运动意图识别算法的实时测评方法，能够对不同信号源算法以及不同识别策略的实时性能进行有效评价，为智能下肢假肢控制系统开发提供可供参考的测试平台。 .txt     

基于模糊评价理论对层燃工业锅炉综合性能的研究与分析

为有效地平衡锅炉效率与排放之间的关系,通过分析锅炉的能效指标,建立了结合效率因素、燃料管理因素和环境因素等的能效评价指标体系。采用组合赋权法确定权重,建立了锅炉系统模糊综合评价模型,并利用该模型对山西大同某层燃蒸汽锅炉进行了综合能效评价与分析。结果表明:锅炉的综合评级得分为0.59,燃料设备因素指标得分仅为0.19。该锅炉热效率虽然达到了设计要求,但锅炉飞灰含碳量偏大,同时过量空气系数为2.34,远大于设计标准1.65。综合分析其原因是漏风过大,该分析结果与现场热力测试实验数据相符合。     

New insight to the oxidation kinetics of silicon-containing steel at high temperature

This study investigated the oxidation kinetics of silicon-containing steel at 1150–1300 °C using a Simultaneous Thermal Analyzer under atmospheric conditions similar to that of an industry reheating furnace. There is a critical time point for the oxidation kinetics at an oxygen concentration of 4·0 vol.-%., following which the oxidation rate constant increases with the increasing oxidation temperature. The model coefficient A in the kinetic oxidation equation was found to be constant. However, before the critical time point, the oxidation rate constant remained unchanged; the model coefficient A decreased with the increasing temperature. Therefore, the kinetic model of silicon-containing steel for isothermal oxidation was observed to be a modified one on the basis of the experimental data. In addition, the critical time point was prolonged with the increasing isothermal oxidation temperature. Moreover, the oxidation activation energy of the tested silicon-containing steel was 366·16 kJ mol^?1.     

A simplified physically-based breach model for a high concrete-faced rockfill dam: A case study

A simplified physically-based model was developed to simulate the breaching process of the Gouhou concrete-faced rockfill dam (CFRD), which is the only breach case of a high CFRD in the world. Considering the dam height, a hydraulic method was chosen to simulate the initial scour position on the downstream slope, with the steepening of the downstream slope taken into account; a headcut erosion formula was adopted to simulate the backward erosion as well. The moment equilibrium method was utilized to calculate the ultimate length of a concrete slab under its self-weight and water loads. The calculated results of the Gouhou CFRD breach case show that the proposed model provides reasonable peak breach flow, final breach width, and failure time, with relative errors less than 15% as compared with the measured data. Sensitivity studies show that the outputs of the proposed model are more or less sensitive to different parameters. Three typical parametric models were compared with the proposed model, and the comparison demonstrates that the proposed physically-based breach model performs better and provides more detailed results than the parametric models.     

利用调度优化模型研究原油调合方案的可行性

针对某沿海炼油企业拟投用原油调合系统以稳定混炼原油的性质,设计方案要求将部分码头罐的操作模式由混储改为单储的情况,采用约束规划与数学规划复合建模,实现了码头至厂区大容积长输线模拟,建立了该企业的原油调度优化模型并研究了设计方案的可行性。针对240h调度周期、10种可加工原油、3艘到港油轮的复杂工况进行了优化计算。结果表明:该设计方案具备可行性,且油轮仍可实现到港即卸油,蒸馏装置混炼油种也可长时间保持稳定;模型的优化计算时间较短(小于15min),且对长输线收付及存油情况模拟准确,复合建模方法满足工业应用要求。     

融合环境因素的有限空间毒气扩散危害程度分析

为探究环境因素对毒气扩散危害程度的影响,通过对比有限空间内外环境差异,了解气体在有限空间内受力情况,并以传统高斯烟羽模型为基础,考虑扩散气体与有限空间边界碰撞产生的反射作用,建立了适用于有限空间气体扩散的改进高斯烟羽模型。深度剖析有限空间气体扩散环境,挖掘气体扩散主要关联因子,构建风速、地表粗糙度对有限空间气体扩散的影响函数;参照有限空间环境特征,分别设置3种不同风速与2种不同地表粗糙度,推求6种不同环境条件下气体扩散面积,阐明风速与地表粗糙度对有限空间气体扩散的影响程度。结果表明:在单一风速条件下,风速越高,地表粗糙度越低,洞室内H2S气体滞留时间越短,洞室内气体的扩散面积越小;风速越低,地表粗糙度越高,洞室内气体的扩散面积越大。     

基于弥散燃料颗粒开裂的金属基体裂纹特征模型

金属基弥散燃料元件在特殊工况下会发生表面起泡失效。燃料颗粒开裂是金属基体开裂的前提条件，只有当金属基体开裂后元件才会发生表面起泡。燃料颗粒开裂后，裂纹宽度和塑性区长度等裂纹特征决定了金属基体开裂行为。基于弹塑性断裂力学和应力平衡条件，建立了基于弥散燃料颗粒开裂的金属基体裂纹特征模型。计算结果表明：裂纹张开位移随退火温度和燃耗深度的升高而增加；裂纹尖端塑性区长度主要与退火温度相关。裂纹张开位移和塑性区长度的计算结果与实验数据均符合较好，验证了金属基体裂纹特征模型的有效性。     

烟气CO2捕集热能梯级利用节能工艺耦合优化

醇胺法捕集CO₂技术是一种较成熟的CO₂捕集技术，具有吸收速度快、脱除效果好等显著优点，但其操作费用高、解吸能耗大。本文以降低醇胺法捕集烟气中CO₂系统再生能耗为出发点，对常规醇胺法捕集CO₂工艺统进行了节能优化研究。在常规工艺流程基础上引入压缩式热泵节能技术，并利用Aspen Plus软件建立了基于压缩式热泵技术的CO₂捕集工艺流程模型。研究了压缩式热泵与机械蒸汽压缩回收（MVR）热泵、分流解吸、分布式换热、级间冷却4种节能工艺耦合，通过模拟计算与优化，结果说明了最佳节能工艺组合为“解吸塔压缩式热泵+贫液MVR热泵+分流解吸+级间冷却”耦合的CO₂捕集工艺流程，当解吸塔顶气体分流比为0.25∶0.75、冷富液分流比为0.05∶0.95、级间冷却器位于吸收塔17块塔板位置、吸收塔输入冷量为-3.0GJ/h时，系统再生能耗最低，为2.533 GJ/tCO₂，相比常规有机胺工艺（再生能耗4.204GJ/tCO₂）节能率39.748%。     

Physicochemical structure characteristics and intrinsic reactivity of demineralized coal char rapidly pyrolyzed at elevated pressure

This study aims to investigate the effect of pyrolysis pressure on the physical and chemical structure characteristics and reactivity of subbituminous demineralized coal char. The pyrolysis experiments were studied under different pressures using a pressurized drop tube reactor (PDTR). Structural properties of coal chars were investigated by the application of scanning electron microscopy (SEM), nitrogen adsorption analyzer, automatic mercury porosimeter, and Raman spectroscopy, respectively. The Random Pore Model was used to determine kinetic parameters and intrinsic reactivity of chars. The specific pore volume of chars pyrolyzed at 900–1000 °C increased first and then decreased with pyrolysis pressure increasing, and the maximum value of the specific pore volume of chars occurred at 1.0 MPa. The degree of graphitization of chars deepened with the increase of temperature or pressure. Intrinsic activation energy of char-O₂ was within the range of 126–134 kJ/mol. The intrinsic reactivity of char-O₂ reaction showed strong correlation the Raman parameters with the change of pyrolysis conditions, and it suggested that the intrinsic reactivity of char-O₂ reaction was mainly affected by aromatic ring structures rather than pore structures.